| ELECTRIC INJECTION UNIT | |||||||
| Screw Cylinder Type | A | B | C | D | E | ||
| Screw Diameter | mm | 18 | 20 | 22 | 25 | 28 | |
| Screw Stroke | mm | 72 | 80 | 90 | 100 | 112 | |
| Theoretical Injection Capacity | cm3 | 18 | 25 | 34 | 49 | 69 | |
| Injection Capacity | (PS)g | 16 | 22.5 | 30.5 | 44 | 65.5 | |
| Standard | Injection Pressure (Max.) |
kgf/cm2 (psi) |
2514 (34945) |
2514 (34945) |
2493 (34652) |
2210 (30719) |
1900 (32025) |
| Holding Pressure (Max.) |
kgf/cm2 (psi) |
2263 (31455) |
2263 (31455) |
2243 (31177) |
1989 (27647) |
1700 (28828) |
|
| Injection Rate | cm3/s | 81 | 94 | 98 | 98 | 126 | |
| Injection Speed | mm/s | 320 | 300 | 260 | 200 | 205 | |
| Injection Unit | 44B | 55B | |||||
| Opening | Injection Pressure (Max.) |
kgf/cm2 (psi) |
2520 (35028) |
2500 (34750) |
2500 (34750) |
2174 (30218) |
2120 (29468) |
| Holding Pressure (Max.) |
kgf/cm2 (psi) |
2268 (31525) |
2250 (31275) |
2250 (31275) |
1956 (27188) |
1908 (26521) |
|
| Injection Rate | cm3/s | 127 | 132 | 136 | 147 | 153 | |
| Injection Speed | mm/s | 500 | 420 | 360 | 300 | 250 | |
| Injection Unit | 75B | ||||||
| Plasticizing Rate | kg/h | 13 | 17 | 21 | 23 | 35 | |
| Screw Speed | rpm | 375 | |||||
| Nozzle Touch Force | kgf | 1500 | |||||
| Cylinder Temperature Control | Nozzle x1 / Cylinder x3 (PID) |
||||||
| HYDRAULIC SERVO CLAMPING UNIT | |||||||
| Mechanism | Hydraulic | ||||||
| Ciamping Force | t | 50 | |||||
| Opening Stroke(Max.) | mm | 200 | |||||
| Min. Mold Height | mm | 180 | |||||
| Daylight Opening(Max.) | mm | 380 | |||||
| Distance Between Tie-Bars | (HxV) mm |
485 x 315 | |||||
| Platen Size | (HxV) mm |
670 x 500 | |||||
| Mold Size(Min.) | (HxV) mm |
240 x 240 | |||||
| Ejector Type | 3 points | ||||||
| Ejector Force | kgf | 2700 | |||||
| Ejector Stroke | mm | 40 | |||||
| GENERAL | |||||||
| Machine Dimension | (LxWxH) m |
2.36 x 1.26 x 3.23 | |||||
| Machine Handling Size | (LxWxH) m |
2.69 x 1.26 x 1.99 | |||||
| Machine Weight | t | 3.6 | |||||
Home
