| Screw Diameter |
mm |
26 |
30 |
| Injection Pressure |
kgf/cm2 |
1677 |
1260 |
| Injection Capacity |
cm3 |
55 |
74 |
| Injection Weight(P.S) |
gr |
50 |
56 |
| oz |
1.8 |
2.4 |
| Injection Rate |
cc/s |
42 |
57 |
| Screw Speed |
r.p.m |
0 ~ 150 |
| Screw Stroke |
mm |
105 |
| Nozzle Stroke |
mm |
150 |
| Nozzle Contact Force |
tf |
2.4 |
| Clamping System |
-- |
Hydraulic |
| Clamping Force |
tf |
25 |
| Clamping Stroke |
mm |
215 |
| Max. Mould Space |
mm |
360 |
| Min. Mould Space |
mm |
145 |
| Overall Size of Platens(HxV) |
mm |
490x290 |
| Space Between Columns(HxV) |
mm |
350x150 |
| Hydraulic Ejector Force |
tf |
0.7 |
| Ejector Stroke |
mm |
28 |
| Drive Motor |
kw |
3.7(5HP) |
| Heater |
kw |
2.3 |
| Dimension of Machine(LxWxH) |
m |
1.25x1.0x2.9 |
| Weight of Machine |
t |
0.9 |
| Shipping Size(LxWxH) |
m |
1.45x1.1x2.25 |
| Shipping Weight |
t |
1.1 |
| Oil Tank Capacity |
l |
120 |
| Cooling Water |
l/hr |
500 ~ 700 |
|
Figures shown herein are subject to change without notice.
Screw and clamping force can be design as customer's request. |
