Vertical Clamping Vertical Injection Two Colors Four Columns Series

YD SERIES

Product Feature

A. Standard double injection Vertical

4-columns direct-pressure clamping. In the upper mold plate, two separate vertical injection units is installed(separate injection hydraulic oil route) with the addition of round disc for this double injection machine.


  • Clamping force is 90- 500TON. Computerized and exclusively configured hydraulic system is used, which is more suitable for the production of general products( or special double-material) injection molding.
  • Two molds are installed on the upper mold plate while three lower molds are installed on the disc. When molding, the disc rotates alternatively at 120°to complete the two-color (two-material) injection molding or overmolding.
  • Highly efficient disc with water jacket device in the middle for cooling of the lower mold.
  • Expandable computer programs and special multistation disc (i.e. two upper molds and four lower molds). In the two lower modes, automated embedding and removing devices can be installed optionally to achieve automation of the whole machine work and increase production efficiency.

B. Other double injection machine:


  • Type 1: A set of independent vertical “injection units” is added onto the upper mold plate of the original injection machine to form a double injection machine.
  • Example: YH / YR / YC models + vertical injection.
  • Type 2: On the original injection machine, one or more sets of independent horizontal (level) injection units is combined to form a double injection machine.
  • Example: YH / YR models + horizontal injection
  • Type 3: The two-colors injection molding machine is combined to form a double injection machine by sharing a common disc.
  • Example: a. YH model + YT model + disc (2 ~ 4 stations)
    b. YH model + YH model + disc (2 ~ 4 stations)
Main specifications

Swipe the table to see more informations

Model
Injection Unit Option Size
No
CLAMPING UNIT
Clamping Force tf
Min. Mold Height mm
Clamping Stroke mm
Max. Open Distance mm
Rotary Diameter mm
Hydraulic Ejector Force tf
Ejector Stroke mm
OTHERS
Driver Motor Kw(hp)
Oil Tank Capacity L
Dimension of Machine (L x W x H) m
Weight of Machine ton
Inquiry
YD-90-4R3
I II
A.B A.B
 
90 (45×2)
200
250
450
Φ 856
2.7
100
 
14.9 (20)
300
1.9 × 1.6 × 3.2
4.5
YD-120-4R3
I II
A.B.C A.B.C
 
120 (60×2)
250
300
550
Φ 980
2.7
100
 
18.7 (25)
380
2.3 × 1.9 × 3.7
8.0
YD-160-4R3
I II
B.C.D B.C.D
 
160 (80×2)
250
300
550
Φ 1172
2.7
100
 
29.8 (40)
560
2.5 × 2.0 × 3.9
10.6
YD-200-4R3
I II
B.C.D.E B.C.D.E
 
200 (100×2)
300
300
600
Φ 1172
3.3
130
 
37.3 (50)
660
2.7 × 2.0 × 4.3
12.4
YD-250-4R3
I II
C.D.E.F C.D.E.F
 
250 (125×2)
300
350
650
Φ 1350
3.3
150
 
44.8 (60)
840
2.9 × 2.4 × 4.5
15.3
YD-350-4R3
I II
F.G.H F.G.H
 
350 (175×2)
350
400
750
Φ 1550
5.4
150
 
52.2 (70)
1020
3.5 × 2.9 × 5.0
23.6
YD-500-4R3
I II
G.H.I G.H.I
 
500 (250×2)
350
500
850
Φ 1750
5.4
150
 
74.6 (100)
1250
4.5 × 3.2 × 5.8
31.2
MODEL
 
INJECTION UNIT
Screw Diameter
(mm)
Injection Pressure
(kgf / cm2)
Injection Capacity
(cm3)
Max. Injection Weight
(gr)
Max. Injection Weight
(oz)
Injection Rate
(cc / s)
Screw Speed
(r.p.m)
Heater
(kw)
 
 
A
Φ 20 Φ 26
1714 1014
25 42
22 38
0.77 1.33
30 52
0 ~ 150
2.0 × 2
 
 
B
Φ 26 Φ 32
1988 1312
55 84
50 75
1.7 2.6
35 52
0 ~ 155
3.5 × 2
 
 
C
Φ 28 Φ 36
2008 1215
83 137
74 123
2.6 4.3
47 78
0 ~ 165
4.5 × 2
 
 
D
Φ 32 Φ 40
1914 1225
124 194
112 175
3.9 6.1
56 88
0 ~ 160
6.0 × 2
 
 
E
Φ 34 Φ 42
1931 1265
149 228
134 205
4.7 7.2
70 108
0 ~ 160
7.5 × 2
 
 
F
Φ 38 Φ 50
2079 1200
204 353
183 317
6.4 11.1
81 141
0 ~ 150
9.0 × 2
 
 
G
Φ 42 Φ 50
2000 1411
276 392
249 353
8.7 12.4
109 154
0 ~ 150
11 × 2
 
 
H
Φ 46 Φ 55
2034 1423
365 522
328 470
11.5 16.5
128 193
0 ~ 150
13 × 2
 
 
I
Φ 55 Φ 65
2082 1491
593 829
534 746
18.8 26.2
258 236
0 ~ 150
15 × 2

*Specifications are subject to change without notice.
*Screw and clamping force are optional.